Cart17items

Cart

Cart17items

Cart

Vehicle filter
Reset

Description

DS18 ZXI-464

The ZXI-464 is a 4×6‑inch 2‑way coaxial car audio speaker pair designed to deliver clear mids and crisp highs, making it an effective upgrade over standard factory-installed speakers. Each speaker features a 4 Ω nominal impedance with 40 W RMS (120 W peak) power handling, ensuring efficient performance for head units and compact amplifiers. With a frequency response from 65 Hz to 20 kHz and 85 dB sensitivity, the ZXI-464 produces balanced, detailed audio suitable for everyday listening and custom car audio setups. The speakers utilize treated paper woofers with rubber surrounds and Mylar dome tweeters for precise sound reproduction. Built with durable steel baskets and included protective grills, the ZXI-464 is ideal for car doors, rear decks, or custom installations where reliable, full-range performance is required.


Specifications

Category Specification
SKU ZXI-464
Nominal Diameter 4 x 6 Inches / 97 x 151 mm
Nominal Impedance 4 Ω
RMS Power Handling 60 W
MAX Power Handling 180 W
Sensitivity 87 dB
Frequency Response 80 Hz – 20 kHz
Recommended Hi-Pass 100 Hz
Speaker Type 2-Way

Midrange
Parameter Specification
Voice Coil Diameter 25.5 mm / 1 inch
Voice Coil Former Material KSV
Winding Material EISV
Cone Material Glass Fiber
Surround Material Rubber
Basket Material Steel
Magnet Material Barium Ferrite
Magnet Weight 10.9 oz / 310 g

Tweeter
Parameter Specification
Nominal Diameter 25.4 mm / 1 inch
Voice Coil Diameter 20.4 mm / 0.8 inch
Voice Coil Former Material KSV
Winding Material EISVM
Diaphragm Material PEI
Magnet Material Neodymium
Magnet Weight 8.5 g / 0.3 oz

Thiele & Small Parameters
Parameter Specification
Vas 1.989 L
Excursion Xmax 2.3 mm
Free Air Resonance Fs 77 Hz
Mechanical Factor Qms 5.97
Electrical Factor Qes 1.15
Total Factor Qts 0.97
Mechanical Mass Mms 9.79 g
Mechanical Compliance Cms 232 mm/N
BL Factor 4.44
Voice Coil Inductance Le 216 mH
Cone Area Sd 77.7 cm²
DC Resistance Re 3.5 Ω
Mechanical Mass without Air Mmd 9 g

Measurements
Parameter Specification
Overall Diameter 3.82 x 5.94 inch / 97 x 151 mm
Overall Depth 71 mm / 2.80 inch
Front Mount Baffle Cutout 87.8 x 140 mm / 3.46 x 5.51 inch
Mounting Depth 52 mm / 2.05 inch
Motor Diameter 84 mm / 3.31 inch
Product Weight 4.5 lbs
Product Dimensions 11.5 x 8 x 3.5 inch
Master Carton Weight 26.5 lbs
Master Carton Dimensions 16.5 x 12.25 x 11 inch
Master Carton Quantity 6
Sold In Pair

 


Product Overview

Kevlar 4×6″ 2-Way Coaxial Car Speaker 180 Watts 4-Ohm

Experience music like never before with the DS18 ZXI-464 – the perfect solution for audiophiles looking to elevate their car audio system’s sound quality. This speaker is designed to deliver powerful sound with little to no distortion, ensuring an enhanced listening experience that will leave you wanting more.

The ZXI-464 features a Kevlar cone woofer with a rubber surround, the perfect combination for delivering precise and punchy bass responses. Kevlar is a durable and lightweight material that is commonly used in bulletproof vests: but is ideal for creating speaker cones due to its excellent strength-to-weight ratio. Combined with the rubber surround the ZXI-464 comes with reduces unwanted vibrations, resulting in a cleaner and more accurate sound.

The 2-way design on the ZXI-464 equips the 4×6” woofer with a 1” Neodymium Magnet Tweeter, which delivers unmatched clarity and detail in the higher end of the frequency range. Neodymium magnets are known for their lightweight and powerful properties, allowing the speaker to reproduce accurate high frequencies without increasing the overall weight of the speaker resulting in a more balanced and natural sound.

With frequency responses ranging from 80Hz – 20KHz, the ZXI-464 is built to deliver clear and powerful sound across the entire frequency spectrum.

No matter where your car takes you, DS18’s ZXI-464 will immerse you in the music like never before. Upgrade with DS18’s ZXI-464 and experience the difference today.

Reviews

There are no reviews yet.

Be the first to review “DS18 ZXI-464”

Your email address will not be published. Required fields are marked *

Questions and Answers

Q1: What size are the ZXI-464 speakers?

A1: They are 4×6‑inch 2‑way coaxial car audio speakers.

Q2: How much power can the ZXI-464 handle?

A2: Each speaker handles 40 W RMS and up to 120 W peak power.

Q3: What is the impedance of the ZXI-464?

A3: They have a 4 Ω nominal impedance compatible with most car audio systems.

Q4: What frequency range do they cover?

A4: They cover approximately 65 Hz to 20 kHz for balanced, full-range sound.

Q5: What features improve sound quality?

A5: The ZXI-464 uses treated paper woofers, rubber surrounds, Mylar dome tweeters, and sturdy steel baskets with protective grills for clear, detailed, and reliable audio performance.


Still have questions?

Ask a question