Description
Pioneer TS-D12D2
The Pioneer TS-D12D2 is a 12-inch dual 2-ohm voice coil subwoofer from the D-Series, engineered to deliver deep, powerful bass in both sealed and ported enclosures. With a 600W RMS (2000W peak) rating, it features an Aramid Fiber Interlaced Injection Molded Polypropylene (IMPP™) cone, a butyl rubber surround, and a double-stacked ferrite magnet for enhanced power handling and efficiency. Its frequency response range of 20 Hz to 4,700 Hz ensures accurate and detailed bass reproduction, making it ideal for audiophiles seeking high-performance sound.
Specifications
PRODUCT PERFORMANCE
| Specification | Value |
|---|---|
| Continuous Power Handling (RMS) | 600 W |
| Maximum Peak Power Handling | 2000 W |
| Frequency Response | 20 Hz – 4.7 kHz |
| Nominal Impedance | 2-Ohm Dual |
| Sensitivity (1W/1m) | 76 dB |
| System Type | Component |
FEATURES
| Specification | Value |
|---|---|
| CarSoundFit | Yes |
| Cut Out Dimensions | 11-1/8″ (28 cm) |
| Equivalent Compliance (VAS) | 46.2 L, 1.63 Cu. Ft. |
| Free Air Resonance (Fs) | 33 |
| Linear Excursion (Xmax) | 1/2″ (13 mm) |
| Mounting Depth | 6-1/8″ (16 cm) |
| Port Diameter | 3″ (8 cm) |
| Port Length | 6″ (15 cm) |
| Recommended Ported Box Volume | 28.3 L, 0.82 Cu. Ft. |
| Recommended Sealed Enclosure Volume | 28.3 L, 0.82 Cu. Ft. |
| Total Speaker Q (Qts) | 0.64 |
| Woofer Dimensions | 12″ |
MATERIALS
| Component | Material / Specification |
|---|---|
| Basket Material | Stamped Metal |
| Center Cap Material | ABS |
| Cone Material | IMPP – Aramid Fiber |
| Installation Ring | ABS |
| Magnet Material | Ferrite |
| Magnet Weight | 73.6 oz |
| Surround Material | Rubber |
| Surround Type | Rolled |
| Voice Coil Bobbin | Aluminum |
| Voice Coil Type | Dual Voice Coil 2-Ohm |
About The Product
The 12″ Dual 2-Ohm Component Subwoofer delivers 2000 W maximum power with 600 W RMS, engineered for high output and deep, controlled bass. Its IMPP™ cone reinforced with aramid fiber and rubber surround provide durability, precision, and excellent sound performance.
Easily Upgrade to High Performance
Pioneer’s A-series sound design matches the subwoofer to full-range loudspeakers for smooth, seamless audio with dynamic and high-impact bass, allowing you to fully experience your music.
Shallow Compact Design
With a mounting depth of 6-1/8″, this subwoofer fits into smaller enclosures while still delivering powerful bass, making it ideal for installations in a variety of vehicles.
IMPP™ Cone with Aramid Fiber
The injection-molded polypropylene (IMPP™) cone, reinforced with aramid fiber, is lightweight yet rigid, ensuring clear, natural sound and deep, precise bass without distortion.
Dual Voice Coil & Aluminum Bobbin
The dual 2-Ohm voice coils allow flexible wiring configurations for different amplifiers, while the aluminum bobbin enhances heat dissipation and durability during high-power operation.
Deep Bass Performance
The combination of a high-strength ferrite magnet and precise motor structure ensures tight, deep bass with strong punch, even at high excursion levels.
CarSoundfit App
Pioneer’s Car Sound Fit app allows you to simulate and compare your car’s audio system using your smartphone, providing a preview of the performance gains with Pioneer upgrades.
This subwoofer is built for high-power handling, versatile installation, and superior bass performance, perfect for serious car audio enthusiasts.
Reviews
There are no reviews yet.