Description
DS18 PRO-DRNMS
Specifications
General Specs
| Feature | Details |
|---|---|
| SKU | PRO-DRNMS |
| Throat Diameter | 2″ / 50.8 mm |
| Installation Type | Bolt-on |
| Nominal Impedance | 8 Ohm |
| AES Power Handling | 110 W |
| Program Power Handling | 220 W |
| Peak Power Handling | 440 W |
| Sensitivity (1w/1m) | 120 dB |
| Frequency Response | 250 Hz – 12.5 kHz |
| Recommended Hi Pass Crossover | 600 Hz |
Motor
| Feature | Details |
|---|---|
| Mid-Driver Voice Coil Diameter | 3.5″ / 90 mm |
| Voice Coil Former Material | Kapton |
| Winding Material | CCAR |
| Diaphragm Material | Polyester |
| Magnet Material | Neodymium |
Measurements
| Feature | Details |
|---|---|
| Overall Diameter | 5.2″ / 132 mm |
| Overall Depth | 2.7″ / 69 mm |
| Bolt Pattern | M6 – 4″ / 102 mm |
Shipping Info
| Feature | Details |
|---|---|
| Gross Single Unit Weight | 1.8 kg |
| Single Unit Box Dimensions (W x L x H) | 170 x 168 x 93 mm |
| Quantity of Units in Master Carton | 8 |
| Gross Master Carton Weight | 14.5 kg |
| Master Carton Dimensions (W x L x H) | 350 x 350 x 201 mm |
Product Overview
DS18 PRO-DRNMS
2” Neodymium Mid-Range Compression Driver 8Ω
Help your mid-range break through with DS18’s PRO-DRNMS — a 2-inch mid-range compression driver built for high-output performance. With 110W AES, 220W program, and 440W peak power handling, this compression driver complements midbass or mid-range speakers to fill out the high-end of your mid-range frequencies.
Lightweight Neodymium Magnet Strength
The PRO-DRNMS is powered by a neodymium magnet that’s lighter, stronger, and more efficient than traditional ferrite — making this driver perfect for show builds and high-powered sound systems.
High-Temperature Voice Coil
With a massive 3.5″ polyester voice coil wrapped on a heat-resistant Kapton former, the PRO-DRNMS runs cooler at higher SPL’s so your sound stays tight no matter how hard you go!
Wide Frequency Response for Mid-Range Clarity
Covering 250Hz–12.5kHz, this compression driver is perfect for detailing vocals, instruments, and mids in any full-range setup. Pair it with a 600Hz high-pass crossover to fine-tune your system for serious performance.
Easy Installation, LOUD Results
Mount it quickly using the 4” M6 bolt-on pattern! This driver commands attention in any soundstage, stuntwall, or vehicle.
Go pro with the PRO-DRNMS and get the show quality you’ve been waiting for!
Reviews
There are no reviews yet.