Cart5items

Cart

Vehicle filter
Reset

Description

Pioneer GM‑ME300X1C

The Pioneer GM‑ME300X1C is a marine‑rated Class‑D mono subwoofer amplifier designed for rugged outdoor/vehicle use. It delivers 300 W RMS x 1 channel into both 4 Ω and 2 Ω loads. 
It features an IP67 ingress‑protection rating (dust‑tight and suitable for immersion up to 1 m for 30 minutes when properly installed) and meets SAE J1171 ignition‑protection standards — making it suitable for marine, powersport or harsh‑environment car installations. Additional features include a 21‑step low‑pass filter (50‑500 Hz), 0/6/12 dB bass boost, speaker‑level input option, and Pioneer’s Protection Control System (PCS) to safeguard from thermal/current/voltage faults.


About The Product

Great as a subwoofer amp or as part of a larger system with other amplifiers. Digital design runs cooler and more efficiently that similar analog amplifiers

  • Waterproof (IP67 rated) resistant to rain, splash and spray
  • 300 watts RMS (continuous) power at 4 ohms
  • 300 watts RMS (continuous) power at 2 ohms
  • Digital 1 channel design
  • Frequency Response – 20 – 240 Hz
  • Signal-to-Noise Ratio – 75dB
  • Dimensions (L x W x H) – 11-13/16″ x 4-1/8″ x 1-5/8″
  • PCS (Protection Control System)
  • Built in crossover with 21-step frequency selection (LPF/HPF)
  • Switching power supply controlled by microcomputer
  • 1 year manufacturer warranty

Pioneers GM-ME300X1C is a weatherproof, Class-D monoaural marine amplifier that is IP67 rated and SAE J1171 Certified. This amplifier features 21-step frequency selection and top adjustment access that benefits when installing into narrow compartments. The microcomputer Protection Control System (PCS), provides thermal protection, controlled current, and voltage protection to ensure stable output operation. The microcomputer also provides a selectable power mode to match the speakers handling.

Reviews

There are no reviews yet.

Be the first to review “Pioneer GM‑ME300X1C”

Your email address will not be published. Required fields are marked *

Questions and Answers

Q1: What is the power output of the GM‑ME300X1C?
A1: It delivers 300 W RMS on one channel into 4 Ω or 2 Ω loads (14.4 V, ≤1% THD).
Q2: Is it suitable for marine or harsh‑environment use?
A2: Yes — the unit is IP67 rated for dust and water protection and SAE J1171 certified for ignition protection, making it suitable for marine or outdoor installation.
Q3: What key tuning and control features does this amplifier provide?
A3: It includes a variable low‑pass filter (50‑500 Hz, 12 dB/octave), a switchable bass boost (0/6/12 dB), a gain control, and speaker‑level input capability for flexible installation.
Q4: Can I use this amplifier in a standard car (not marine) setting in Pakistan?
A4: Yes — the amplifier works with any 12‑V negative‑ground system (common in cars). You’ll need proper wiring (power/ground/fuse), and ensure your subwoofer or system matches the output power and impedance (2 Ω or 4 Ω) of the amp. The marine‑rating gives extra ruggedness but it's fully usable in cars.
Q5: What should I check for installing this amplifier in Karachi or Pakistan?

A5:

  • Ensure you have adequate wiring gauge (8 AWG or better) and a fuse (30 A recommended) on the power lead.

  • Confirm your subwoofer’s impedance and power handling match the 300 W output of the amp (with headroom) to avoid under/over‑powering.

  • Because it is marine rated, ensure it is mounted in a ventilated, safe location with stable 12 V supply and proper ground.

  • Check availability of authorized service centers and warranty support locally.


Still have questions?

Ask a question