Cart5items

Cart

Vehicle filter
Reset
Home 3ShopSubwoofersDS18 SLG-UDSD6LD-20UP

Description

DS18 SLG-UDSD6LD-20UP

The SLG-UDSD6LD-20UP is a loaded under-dash subwoofer enclosure designed exclusively for 2020 and newer Polaris Slingshot models. It comes pre-loaded with two high-output 6.5″ ZR6.4D subwoofers, offering deep, powerful bass in a compact sealed enclosure that fits neatly beneath the passenger side dash. Built with rugged water-resistant polyethylene (PE), a black OEM-style finish, and all necessary hardware and wiring included, this upgrade enhances low-frequency performance while maintaining a clean, factory-like installation.


General Specifications

Specification Value
SKU SLG-UDSD6LD-20UP
Speaker Size 2 × 6.5″
Total Impedance 1 Ohm
Total RMS Power Handling 600 W
Total MAX Power Handling 1200 W
Sensitivity (1W/1m) 90 dB
Frequency Response 38 Hz – 200 Hz
Recommended Low-Pass Crossover 120 Hz

Speaker Specifications
Specification Value
Voice Coil Diameter 1.5″ / 38.8 mm
Voice Coil Former Material Aluminum
Winding Material Copper
Cone Material Non-Pressed Paper
Dust Cap Material PPI
Surround Material Foam
Basket Material Steel
Magnet Material Ferrite
Magnet Weight 50 oz

Box Specifications
Specification Value
Internal Volume 0.3 ft³ / 8.5 L
Load Configuration Parallel
Box Type Sealed
Box Material Polyethylene (PE)
Finish Material Black
-3 dB Dropping Point (F3) 42 Hz
UV Protection Yes
Waterproof Rating IP65

Measurements
Measurement Value
Overall Height 7.27″ / 184.66 mm
Overall Width 14.64″ / 371.86 mm
Overall Depth 7.19″ / 182.63 mm

 


Product Overview

Under Dash Dual 6.5″ Subwoofer Enclosure with ZR6.4D Subwoofers for 2020+ Polaris Slingshot

If you’re serious about bass, DS18’s SLG-UDSD6LD-20UP is the upgrade your Slingshot has been waiting for. Designed to fit perfectly in all 2020 and newer Polaris Slingshot models, this under-dash enclosure comes loaded with two high-output ZR6.4D 6.5” subwoofers for serious punch in a compact package.

Built to Boom
Each ZR6.4D subwoofer pushes 300W RMS and 600W MAX for a total of 1200W of earth-shaking bass. With a frequency range of 38Hz–200Hz, your Slingshot feels every frequency. The pressed paper cones, 1.5″ aluminum voice coils, and ferrite magnets ensure deep, clean bass on every ride.

Weather-Ready Construction
This sealed 0.3ft³ enclosure is built from rugged, waterproof polyethylene with a black textured OEM finish. The coated metal bracket offers increased protection against the elements, while the built-in damping material reduces resonance and elevates bass clarity.

Easy Install, OEM Fit
The SLG-UDSD6LD-20UP mounts using factory bolt points and includes all hardware: stainless steel screws, M8 washers, and a 6mm Allen key. It won’t interfere with your glove box and includes OFC 12Ga pre-installed tinned wiring for maximum power transfer and corrosion resistance.

DS18’s SLG-UDSD6LD-20UP has the bass your 2020+ Slingshot has been missing. Plug it in, bolt it down, and feel the difference every time you ride!

Reviews

There are no reviews yet.

Be the first to review “DS18 SLG-UDSD6LD-20UP”

Your email address will not be published. Required fields are marked *

Questions and Answers

Q1: What is the SLG-UDSD6LD-20UP?

A1: It’s a pre-loaded under-dash subwoofer enclosure with two 6.5″ ZR6.4D subwoofers designed to boost bass performance in 2020 and newer Polaris Slingshot vehicles.

Q2: What power handling can I expect?

A2: The dual subwoofers together handle up to 600 W RMS and 1200 W peak power, providing impactful low-frequency performance.

Q3: What is the impedance and sensitivity?

A3: The enclosure is wired for 1 ohm total impedance and has a sensitivity rating of 90 dB, making it easy to drive with a dedicated amplifier.

Q4: Is the enclosure durable and weather-resistant?

A4: Yes — it’s constructed from rugged polyethylene (PE) with an IP65 water-resistant rating and UV protection, allowing it to withstand moisture and cleaner environments.

Q5: Will it fit my Slingshot without modification?

A5: Yes — the subwoofer enclosure is engineered for factory bolt-on fitment on 2020+ Polaris Slingshot models and includes all hardware and wiring for straightforward installation.


Still have questions?

Ask a question