Cart5items

Cart

Vehicle filter
Reset
Home 3ShopSubwoofersDS18 RZR-GBSUB10LD

Description

DS18 RZR-GBSUB10LD

The RZR‑GBSUB10LD is a loaded 10″ subwoofer enclosure engineered specifically for Polaris RZR UTVs (2014 – 2023) that replaces the factory glove box compartment with a powerful bass‑enhancing module. This custom fit sub box includes a 10″ high‑output subwoofer capable of handling up to 600 W RMS (1200 W peak) and delivers deep, impactful low frequencies with a 92 dB sensitivity across a 25 Hz – 250 Hz range — perfect for riders who want robust bass without sacrificing interior space. Built from rugged IP65‑rated weather‑resistant polyethylene (PE), it ensures trail‑worthy durability, direct OEM texture matched finishes, and includes all mounting hardware and wiring harnesses required for easy installation.


 Specifications

Specification Value
SKU RZR-GBSUB10LD
Nominal Diameter 10″ / 254 mm
Nominal Impedance 2 Ohms
RMS Power Handling 600 W
MAX Power Handling 1200 W
Sensitivity (1W/1m) 92 dB
Frequency Response 25–250 Hz
Recommended Low-Pass Crossover 120 Hz

Body / Features
Specification Value
Enclosure Material Polyethylene (PE)
Marine Grade IP65
Sold Single
Color / Finish Black
Port Plug Cover Yes (Rubber)
Direct OEM Fit Yes

Woofer Specifications
Specification Value
Voice Coil Diameter 2″ / 50.8 mm
Voice Coil Former Material Black Aluminum
Winding Material SV
Cone Material Non-Pressed Paper
Dust Cap Material Carbon Fiber
Surround Material Rubber
Basket Material Steel
Magnet Material Ferrite
Magnet Weight 81 oz

Thiele & Small Parameters
Parameter Value
Equivalent Volume VAS 23.67 L / 0.835 ft³
Excursion (XMAX) 21 mm
Free Air Resonance FS 37 Hz
Mechanical Factor QMS 5.07
Electrical Factor QES 0.76
Total Factor QTS 0.66
Moving Mass MMS 140.16 g
Compliance CMS 0.13 mm/N
Bl Factor BI 9.26
Voice Coil Inductance LE 0.38 mH
Diaphragm Area SD 352.99 cm²
DC Resistance RE 2.01 Ohms

Box Specifications
Specification Value
Sealed Internal Volume 25.4 L / 0.9 ft³
Sealed Box Output Response F3 64 Hz
Ported Internal Volume 25.4 L / 0.9 ft³
Port Size (Diameter × Length) 2.75″ × 11.8″ / 70 × 300 mm
Port Tuning Frequency FB 36 Hz
Ported Box Output Response F3 32 Hz

Box Measurements
Measurement Value
Overall Height 16.9″ / 430 mm
Overall Width 16.9″ / 430 mm
Overall Depth 14.17″ / 360 mm

Product Overview

The Polaris RZR just got LOUDER with DS18’s RZR-GBSUB10LD: This 10″ Loaded Subwoofer Enclosure fits perfectly in the RZR’s Glove Box and delivers powerful bass in a weather-resistant design. Its direct OEM texture and fit ensure perfect integration into your RZR, so you don’t have to think too hard when thinking outside!
With a 10″ 1200W water-resistant subwoofer, this enclosure delivers deep, impactful bass that resonates. The included mounting brackets and screws minimize the mounting depth guaranteeing a hassle-free installation with no cutting or modifications needed.
This subwoofer enclosure has a nominal impedance of 2 ohms and RMS power handling of 600W, allowing it to handle even the most demanding systems. Its sensitivity rating of 92dB allows crystal-clear reproduction, while its frequency response of 25Hz-250Hz captures every drop accurately.
DS18’s RZR-GBSUB10LD has a range of impressive features: like the included port plug cover, adding an extra layer of protection when not in use. Or the enclosure material, also made from durable polyethylene (PE) and marine-grade IP65 rated, providing excellent protection against the elements on any trail!
Provided are two Ride Command Harnesses to connect the RZR-GBSUB10LD to your RZR’s Ride Command Center for easy amplifier installation. One comes with a remote and RCA output: this is used for your subwoofer. The other harness is a full range audio output used for audio signal only.
Get LOUD off-road like never before with DS18’s RZR-GBSUB10LD!

Reviews

There are no reviews yet.

Be the first to review “DS18 RZR-GBSUB10LD”

Your email address will not be published. Required fields are marked *

Questions and Answers

Q1: What is the RZR‑GBSUB10LD?

A1: It’s a loaded 10″ subwoofer enclosure designed to replace the glove box in select Polaris RZR models with a powerful bass unit that enhances low‑frequency output.

Q2: Which vehicles is this subwoofer enclosure compatible with?

A2: It fits Polaris RZR UTVs from 2014 through 2023, replacing the existing glove box compartment with a custom bass enclosure.

Q3: How much power can this subwoofer handle?

A3: The included 10″ sub is rated for 600 W RMS and 1200 W peak power handling, providing serious low‑end output when paired with a capable amplifier.

Q4: Is the enclosure weather‑resistant?

A4: Yes — the box is made from durable polyethylene with an IP65 marine‑grade rating, offering protection against water, dust, and trail conditions.

Q5: Does it come with installation hardware?

A5: Yes — the subwoofer enclosure includes mounting hardware, port plug cover, Ride Command harnesses, and wiring, allowing for a direct fit installation with minimal modification.


Still have questions?

Ask a question