Cart0items

Cart

Vehicle filter
Reset

Description

DS18 PRO-X6.4BMSL

The DS18 PRO-X6.4BMSL is a premium 6.5-inch dual 4-ohm high-excursion subwoofer designed for car audio enthusiasts who want deep, punchy, and precise low-frequency performance in a compact size. Rated at 350 W RMS and 700 W peak power handling, this subwoofer delivers controlled, tight bass with excellent efficiency. Its rugged construction ensures reliability for daily drivers, compact SPL builds, or high-performance car audio systems. Suitable for both sealed and ported enclosures, the PRO-X6.4BMSL produces bass response down to approximately 40 Hz, providing immersive, high-impact low-end in smaller car setups.


Specifications

Specification Value
SKU PRO-X6.4BMSL
Nominal Diameter 6.5 Inch / 165 mm
Nominal Impedance 4 Ohms
RMS Power Handling 200 W
Max Power Handling 400 W
Sensitivity (1W/1M) 95 dB
Frequency Response 80 Hz – 5 kHz
Recommended Hi-Pass Crossover 130 Hz
Sold As Single
Grill Included No

MOTOR & CONE SPECIFICATIONS
Specification Value
Voice Coil Diameter 1.5 Inch / 38.1 mm
Voice Coil Former Material Kapton
Winding Material CCAW
Cone Material Non-Pressed Paper
Bullet Material Aluminum
Bullet Finish Glossy Red
Surround Material Cloth
Basket Material Steel
Basket Finish / Color Glossy Red
Magnet Material Ferrite
Magnet Weight 21 Oz

THIELE & SMALL PARAMETERS
Parameter Value
Equivalent Volume (Vas) 4.51 L / 0.159 ft³
Excursion (Xmax, one way) 6.4 mm
Free Air Resonance (Fs) 140 Hz
Mechanical Factor (Qms) 6.59
Electrical Factor (Qes) 0.81
Total Factor (Qts) 0.72
Mechanical Mass (Mms) 6.92 g
Mechanical Compliance (Cms) 0.19 mm/N
BL Factor (BL) 4.99
Voice Coil Inductance (Le) 0.03 mH
Cone Area (Sd) 130.7 cm²
DC Resistance (Re) 3.3 Ohms

MEASUREMENTS
Specification Value
Overall Diameter 6.65 Inch / 169 mm
Overall Depth 2.36 Inch / 60 mm
Front Mount Baffle Cutout 5.63 Inch / 143 mm
Mounting Depth 2.15 Inch / 54.5 mm
Motor Diameter 4.3 Inch / 110 mm

Product Overview

PRO-X 6.5″ Slim Mid-Range Loudspeaker with Bullet 400 Watts 4-Ohm

The PRO-X6.4BMSL is a slim mid-range designed to take your sound system to EXTREME levels of performance.
Featuring a 1.5″ Kapton Voice Coil, the PRO-X6.4BMSL is built to withstand the most intense jam sessions without compromising on quality, so you can play your music as long as you want.

Engineered for compatibility, the PRO-X6.4BMSL has a reduced mounting depth and an RMS Power Rating of 200W allowing it to effortlessly integrate into any build.

Equipped with an innovative Bullet Resonator, the PRO-X6.4BMSL is insanely versatile. From deep and powerful bass at 80Hz to crystal-clear highs reaching 5KHz, the PRO-X6.4BMSL delivers a complete audio experience. Its high 93dB sensitivity ensures accurate tonal reproduction even at extreme volumes.

The PRO-X6.4BMSL strikes the perfect balance between size and performance. Redesigned with meticulous attention to detail, it features a sturdy steel basket with a vibrant red gloss finish so you can get LOUD in style.

Reviews

There are no reviews yet.

Be the first to review “DS18 PRO-X6.4BMSL”

Your email address will not be published. Required fields are marked *

Questions and Answers

Q1: What is the DS18 PRO-X6.4BMSL?

A1: It is a 6.5-inch dual 4-ohm high-excursion subwoofer built to deliver deep, punchy, and precise low-frequency audio for car systems.

Q2: What is the power handling of this subwoofer?

A2: The PRO-X6.4BMSL is rated at 350 W RMS and 700 W peak power handling.

Q3: Can it be used in sealed or ported enclosures?

A3: Yes, it performs excellently in both sealed and ported enclosures for compact or SPL-focused car audio setups.

Q4: Is it suitable for daily driver audio setups?

A4: Absolutely. Its durable construction and efficient design make it perfect for daily use, compact builds, or high-performance car audio systems.

Q5: What kind of bass performance can I expect?

A5: Expect tight, punchy, and deep low-end bass down to approximately 40 Hz, ideal for small enclosures and compact high-output systems.


Still have questions?

Ask a question