Cart5items

Cart

Vehicle filter
Reset

Description

DS18 EXL-TR15.4D

The DS18 EXL-TR15.4D is a 15-inch high-excursion dual-voice-coil (DVC) car subwoofer designed for powerful, precision bass in high-performance car audio systems. Equipped with dual 4 Ω voice coils (4 + 4 Ω) and large 3″ black aluminum CCAW voice coils, it delivers 2000 W RMS and up to 4000 W peak power, producing deep, controlled low-frequency output. With a frequency response spanning approximately 20 Hz to 1.5 kHz and 88 dB sensitivity, the EXL-TR15.4D ensures tight, impactful bass suitable for both sealed and ported enclosures. Its durable construction features a reinforced paper cone, glass fiber dust cap, high-roll foam surround, and rugged black aluminum basket paired with a heavy ferrite magnet, supporting extreme excursion and long-term reliability. Recommended low-pass crossover around 80 Hz and flexible wiring options make this subwoofer ideal for enthusiasts seeking high-powered, bass-driven car audio performance.


Specifications

Parameter Value
SKU EXL-TR15.4D
Nominal Diameter 15″ (381 mm)
Nominal Impedance 4 + 4 ohms
RMS Power Handling 2500 W
Maximum Power Handling 5000 W
Sensitivity (1W/1m) 84 dB
Frequency Response 10 – 400 Hz
Recommended Low-Pass Crossover 120 Hz

Features
Parameter Value
Demodulating Rings No
Improved Heat Dissipation Yes
Cone Shape Curvilinear
Speaker Terminals Push 6ga

Motor & Construction
Parameter Value
Voice Coil Diameter 4″ (99.8 mm)
Voice Coil Former Material Black Aluminum
Winding Material CCAW
Cone Material Non-Pressed Paper + Epoxy Coating
Dust Cap Material PPI
Surround Material Foam
Spider Diameter 8.5″ (215 mm)
Leads Connection Type Crossed Spider
Basket Material Aluminum
Basket Finish Black
Magnet Material Ferrite
Magnet Weight 3 × 98.3 oz (295 oz total)
Displacement Volume 3.1 L (0.109 ft³)

Thiele & Small Parameters
Parameter Value
Vas (Equivalent Volume) 36.8 L (1.29 ft³)
Xmax (Excursion, one way) 20 mm
Fs (Free Air Resonance) 42 Hz
Qms (Mechanical Factor) 5.427
Qes (Electrical Factor) 0.8
Qts (Total Factor) 0.697
Mms (Moving Mass) 396.785 g
Cms (Compliance) 0.0363 µm/N
Bl Factor 30.676
Le (Voice Coil Inductance) 8.04 mH
Sd (Diaphragm Area) 844.96 cm²
Re (DC Resistance) 3.6 + 3.6 ohms
EBP 52.5

Recommended Enclosures
Parameter Value
Sealed Internal Volume 35.4 L (1.25 ft³)
Sealed Box Output Response F3 45 Hz
Ported Internal Volume 70.8 L (2.5 ft³)
Port Size (WxHxLong) 2.47″ × 15″ × 37″ (62.7 × 381 × 939.8 mm)
Port Tuning Frequency Fb 30 Hz
Ported Box Output Response F3 26.5 Hz

Physical Measurements
Parameter Value
Overall Diameter 15.6″ (398 mm)
Overall Depth 10.6″ (269 mm)
Front Mount Baffle Cutout 14″ (355 mm)
Mounting Depth 9.2″ (234 mm)
Motor Diameter 9″ (230 mm)
 
 

Product Overview

DS18 EXL-TR15.4D

Add a new layer of depth to your system’s audio with DS18’s EXL-TR15.4D!

The EXL-TR15.4D is built to dominate, with a jaw-dropping 5000W MAX power handling and 2500W RMS. It’s designed for those who want relentless performance, delivering ground-shaking low-end that’s perfect for any serious ride. The EXL-TR15.4D’s triple-stacked magnets crank up the magnetic flux: this means brutal bass and unmatched loudness, even at insane power levels.

It’s reinforced curvilinear cone is built tough, combining non-pressed paper and epoxy for rock-solid durability. Its sleek shape cuts through distortion, ensuring crystal-clear sound and lasting performance even under intense power. With a 4-inch dual voice coil made of black aluminum and CCAW winding, the EXL-TR15.4D masters heat dissipation, ensuring it stays cool under pressure. This cutting-edge design keeps the subwoofer firing on all cylinders, handling high power and intense audio conditions without breaking a sweat.

The EXL-TR15.4D rocks both sealed and ported enclosures with ease. Whether you’re after pinpoint accuracy or thunderous resonance, this subwoofer adapts to your needs, delivering peak performance no matter how you set it up. With a sweeping frequency range of 10 to 400 Hz, this subwoofer covers the deepest rumbles and punchy basslines. This full-spectrum bass response ensures crystal-clear, powerful sound that takes your vehicle’s audio to the next level.

Whether you’re a car audio competitor, custom car builder, or simply a bass enthusiast, the EXL-TR15.4D delivers the power and precision you need for perfect audio reproduction.

Reviews

There are no reviews yet.

Be the first to review “DS18 EXL-TR15.4D”

Your email address will not be published. Required fields are marked *

Questions and Answers

Q1: What size is the EXL-TR15.4D subwoofer?

A1: It is a 15-inch high-excursion car subwoofer designed for strong, deep bass output.

Q2: How much power can this subwoofer handle?

A2: The EXL-TR15.4D handles 2000 W RMS and up to 4000 W peak power.

Q3: What is the voice coil configuration and impedance?

A3: It features dual 4 Ω voice coils (4 + 4 Ω) with 3″ black aluminum CCAW coils for flexible wiring options.

Q4: What frequency range does it cover?

A4: It delivers deep bass from approximately 20 Hz to 1.5 kHz, offering tight and controlled low-end performance.

Q5: What construction features improve durability and sound quality?

A5: It includes a reinforced paper cone, glass fiber dust cap, high-roll foam surround, heavy-duty aluminum basket, and a large ferrite magnet for extreme excursion and long-lasting performance.


Still have questions?

Ask a question