Description
Pioneer TS-1200M
The Pioneer TS-1200M is a 12-inch component subwoofer designed to deliver deep, impactful bass in automotive audio systems. With a maximum power handling of 1400W and a nominal power rating of 400W, it features a single 4-ohm voice coil configuration. The subwoofer utilizes an IMPP™ composite cone, known for its rigidity and lightweight properties, ensuring tight and accurate bass reproduction. Its frequency response range spans from 22 Hz to 1.6 kHz, making it suitable for a wide range of music genres. The TS-1200M is designed for use in both sealed and vented enclosures, with recommended box volumes of 1.25 cu.ft. and 1.5 cu.ft., respectively. The subwoofer’s efficiency is rated at 87 dB (1W/1M), and it requires a mounting depth of 5.375 inches (136 mm) for installation.
Specifications
PRODUCT PERFORMANCE
| Specification | Value |
|---|---|
| Continuous Power Handling (RMS) | 400 W |
| Maximum Peak Power Handling | 1400 W |
| Frequency Response | 22 Hz to 1.6 kHz |
| Nominal Impedance | 4-Ohm |
| Sensitivity (1W/1m) | 87 dB |
| System Type | Component |
FEATURES
| Specification | Value |
|---|---|
| CarSoundFit | Yes |
| Cut Out Dimensions | 11-1/8″ |
| Equivalent Compliance (VAS) | 56.1 Liters, 1.98 Cu. Ft. |
| Free Air Resonance (Fs) | 32.1 Hz |
| Linear Excursion (Xmax) | 8.25 mm |
| Port Diameter | 3″ |
| Port Length | 6-1/2″ |
| Recommended Ported Box Internal Volume | 42.5 Liters, 1.5 Cu. Ft |
| Recommended Sealed Enclosure Volume | 35.4 Liters, 1.25 Cu Ft |
| Total Speaker “Q” (Qts) | 0.70 |
| Woofer Dimensions | 12″ |
MATERIALS
| Specification | Value |
|---|---|
| Basket Material | Metal |
| Center Cap Material | ABS |
| Cone Material | Carbon and Mica reinforced Injected Molded Polypropylene (IMPP) |
| Damper | Poly cotton Aramid |
| Magnet Weight | 46 oz |
| Surround Material | Rubber |
| Surround Type | Rolled |
| Voice Coil Bobbin | Aluminum |
| Voice Coil Type | Single Voice Coil 4-Ohm |
| Voice Coil Wire | Copper |
| Wire Terminals | Push Type |
About The Product
12″ Component Subwoofer – 1400 W Max / 400 W Nominal, IMPP™ cone produces tight and accurate bass. Specially designed voice coil offers higher power handling for excellent performance.
Deep Bass
To achieve deep and tight bass, a rigid and lightweight cone is essential. However, without a proper motor structure, it’s useless if you’re looking for a good bass punch. This subwoofer uses a strontium magnet paired with a large copper voice coil and an aluminum voice-coil former for better bass control under high excursions. This also helps achieve better heat dissipation.
Glass-Fiber & Mica Reinforced IMPP™
Polypropylene (PP) is a tough thermoplastic resin that is an ideal material for a speaker cone due to its low mass and high damping properties. PP cones offer good sensitivity and low distortion. However, basic raw polypropylene cones lack the rigidity and strength required for high output and extreme low bass. To resolve this, Pioneer engineers, using advanced Computer-Aided Manufacturing, developed a process to blend glass fibers and mica into the polypropylene resin during the injection molding process. The resulting reinforced IMPP™ cone is thinner and low mass with high rigidity and superior strength, producing natural, detailed sound with deep and powerful bass.
Reviews
There are no reviews yet.